![]() |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sioux Water Pressure
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Trailers - For any unit, balance and weft permitting - Factory installation. | |
| SA-25a | Mini Trailer-2-wheel. Holds up to 1,000 lbs. |
| SA-25b | Trailer-2-wheel. Holds up to 2,000 lbs. |
| SA-26a | Trailer-4-wheel tandem with 15" wheels. Holds up to 5,000 lbs. |
| SA-26b | Trailer-4-wheel, steerable. Holds up to 10,000 lbs. |
| Water Tanks - For any skid or trailer - mounted unit. Factory Installation. | |
| SA-27 | Water Tank-Carbon steel. |
| SA-27a | Water Tank-Stainless steel. |
| SA-27b | Water Tank-Polyethylene plastic. |
| Hose and Hose Accessories | |
| SA-32c | Hose-3/8" x 50' single wire-braid. For use on steam cycle rated to 60 GPH, and high pressure rated to 2,000 PSI. |
| SA-32f | Hose-3/8" x 50' 2-wire braid. For 3,000 PSI high pressure washers, 120-360 GPH. |
| SA-32g | Hose-3/8" x 25' single wire-braid. For steam cleaners and combination units, 40-60 GPH. |
| SA-33 | Hose-1/2" x 25' single wire-braid. For all steam cleaners, or any combination cleaner 80 GPH or higher. |
| SA-31 | Hose-1/2" x 50' single wire-braid. For all steam cleaners, or any combination cleaner 80 GPH or higher. |
| SA-46 | Brass 50- Fan Nozzle. For all steam cleaners and combination units. |
| SA-50b | Quick Coupler-3/8". For any 3/8" hose. |
| SA-50c | Quick Coupler-1/2". For any 1/2" hose. |
| SA-54a | Hose Reel-Manual crank rewind. |
| SA-54b | Hose Reel-Spring rewind. |
| SA-54c | Hose Reel-Motor-driven rewind. |
| Optional Accessories | |
| SA-76 | Shut-Off Gun-For All-Electric steam cleaners and combination units. |
| SA-43b | Downstream Chemical Injection - Injects chemicals downstream of pump and heating system. Use on hot pressure washers. Factory installation. |
| SA-52a | Alternate Electricals - Electrical voltage and frequency other than listed standards. Consult factory. Factory installation. |
| SA-53 | Time Delay - Delays shutdown of water pump to cool heating element. Factory installation. |
| SA-55 | Sand Grit Injector-Hopper or spade pickup. Use on pressure washers 1,000 PSI and 180 GPH or higher. |
| SA-56 | Wheels-4" x 16" with semi-pneumatic tires. Factory installation. |
| SA-56b | Wheels-4" x 10" with fully-pneumatic tires. Factory installation. |
| SA-59 | Hour Meter - Records operating time. Electrically operated. Factory installation. |
| SA-69 | Machine Disconnect Switch - Factory installation. |
| SA-70 | Internal Circuit Breakers (in place of standard fuses)-Factory installation. |
Sioux All - Electric Cleaners Designed for Safety, Reliability, Durability
Myth: Steam cleaners are outdated.
Reality: There are many applications where a steam cleaner may be better than a hot water washer.
At Sioux, we have been building both types of machines for many years. There are some advantages to using hot water washers and some advantages to using steam cleaners. Each cleans in a different way. Determining which machine is best depends on the application.
With a Dakota Series steam cleaner, when heated water at a temperature of 320°F and a pressure of 250 PSI flashes into vapor as it passes through the steam nozzle, there is tremendous expansion, producing about the same impact as a 1,000 PSI pressure washer, with 86% more heat transferred for cleaning.
If heat is what is really needed for cleaning, a steam cleaner is the better choice. In addition, a steam cleaner (vs, a hot water washer) offers the following benefits:
All steam cleaners are not the same. At comparable flow rates, a 320-F steam cleaner produces approximately 40% more steam and will transfer approximately 13% more heat to the surface than the 290-F steam cleaner. The increased heat and steam also significantly increase the cleaning impact, as illustrated in the chart below:
| Pressurized Water Temperature Before Exiting Nozzle as Steam |
% Increase in Cleaning Impact of 320°F vs. Lower Temperatures |
|---|---|
|
320°F vs. 300°F
|
+34%
|
|
320°F vs. 290°F
|
+58%
|
|
320°F vs. 280°F
|
+118%
|
|
320°F vs. 265°F
|
+167%
|
|
320°F vs.250°F
|
+338%
|
For a given cleaning application there are many flow/pressure combinations from which to choose. Here are some criteria you can use to select the best flow and pressure combination for your application.
| Example | Rating | % Additional Work |
% Additional Force |
|---|---|---|---|
| High Pressure | 3.5 GPM @ 3000 PSI |
-
|
-
|
| High Flow | 5.3 GPM at 2000 PSI |
29%
|
40%
|
Any Sioux Cleaner can be mounted on our heavy-duty trailers. All trailers are constructed of 11-gauge rectangular steel tubing and heavy duty angle iron.
Sioux Trailers are ready to use and are available with a variety of accessories. Because most trailers are individually built to the needs of the cleaner, the exact specifications and accessories may vary.
"Over-the-Road" trailers include wiring harness, leveling jack, reflectors, turn signals, break-away safety chains and either ball hitch or lunette eye. If unit has an exhaust hood, rain cover will also be furnished. Self-contained units are available by adding special options such as water tanks, engines, generators and hose reels. Sioux trailers can be customized to meet your requirements.
2-Wheel Mini-Trailer
SA-25a Mini-Trailer- Features wiring harness, leveling jack, rain cover on exhaust hood, breakaway safety chains, ball hitch, reflectors, turn signals, and easy access to controls. Trailer is complete and ready to use "Over-the-Road." Leaf spring suspension with 16.5 x 6.5 - 8 tires. Tongue can be removed to decrease required storage space.
| Length (Including Tongue) |
82"
|
| Width |
71"
|
| Height |
24"
|
| Tongue Length |
30"
|
| Trailer Weight, approximate |
225 lbs
|
| Load Capacity |
1,000 IBS
|
2-Wheel Standard Trailer
SA-25b 2-Wheel nailer- Features 15" 4-ply tubeless radial tires, semi-elliptical leaf springs, complete wiring harness with reflectors for "Over-the-Road" use, easy access to controls, rain cover on exhaust hood, leveling jack; ball hitch and breakaway safety chains, ready to use. Tongue can be removed to decrease required storage space.
| Length (Including Tongue) |
90"
|
| Width |
72"
|
| Height |
33"
|
| Tongue Length |
36"
|
| Trailer Weight, approx |
350 IBS
|
| Load Capacity |
2,000 IBS
|
We are referring to the Siebring Pressure Washer. For those requiring smaller units, lower capacity, economical grade.
Index Page | Sioux
Water Pressure Washers
Siebring Hot & Cool Direct Drive Pressure
Washers
Copyright © 1998-2008 U.S. Global Resources (USGR). All rights reserved.
Contact USGR :: Top
Web site developed by Infothai CM Co., Ltd.
This page was updated on:
June 13, 2008